AMSOIL Synthetic Motor Oils

AMSOIL synthetic lubes deliver maximum power, outstanding
fuel economy and the rugged protection 4-wheel drives need.

Four-wheel drive vehicles are often subjected to periods of heavy throttle application, towing and dirty, off-road driving. These harsh operating conditions
mean four-wheel drive vehicles demand extra protection from a motor oil. AMSOIL synthetic motor oils are formulated with the most advanced chemistries available. High quality base stocks combined with an exact blend of premium additives, provide second-to-none protection and performance in the most demanding operating conditions.

Clean All-Temp Protection
AMSOIL synthetic motor oils not only run clean in high temperatures, they actually help hold down engine heat during high stress operations. In cold
temperatures, AMSOIL synthetic motor oils flow readily, providing dependable starting and quick post-startup protection.

Load Protection
Towing and travel over rough terrain put extra load on the engine. AMSOIL synthetic motor oils provide an extremely durable lubricating film, one that’s
tough to break no matter how heavy the load. A robust package of anti-wear additives insures protection against accelerated wear during high load
operation. The shearing forces generated inside today’s high RPM automobile engines can literally tear apart the molecules of conventional oils.
AMSOIL synthetic motor oils, because of their unique synthetic construction, withstand shearing forces. AMSOIL motor oils don’t thin out and lose
viscosity like conventional oils do.

Resist Volatilization
The unbalanced hydrocarbon structure of conventional petroleum-based motor oils contains molecules of many different shapes and sizes. In high temperatures the lighter molecules tend to vaporize, leading to oil consumption, oil thickening and a loss of performance. AMSOIL synthetic motor oils don’t burn off during high-temperature, high stress operation. Their pure, uniform molecules provide an unsurpassed level of stability, even under the most extreme operating conditions.

Power and Fuel Economy
Conventional motor oils tend to “boil off” in high temperatures. Vaporized oils grow thick and heavy. They circulate poorly, reduce fuel efficiency and contribute
to excessive emissions and engine wear.Of course, oil consumption skyrockets as oil boils off. AMSOIL synthetic motor oils’ superior vaporization resistance keeps fuel economy high, oil circulation efficient, and oil consumption, emissions, and most importantly, engine wear, to a minimum. AMSOIL synthetic motor oils allow engines to run smoother and easier, producing more power and performance and better fuel economy.

Resist Oxidation
Conventional oils oxidize in high temperatures, causing sludge and deposit build-up that decrease fuel efficiency, contribute to corrosion and increase
engine wear. AMSOIL synthetic motor oils resist oxidation and thermal breakdown far better than conventional oils. Because AMSOIL motor oils’
synthetic formulation resists oxidation so well, they run naturally cleaner than conventional oils. AMSOIL motor oils have a superior detergent/dispersant additive package that, when tested after tens of thousands of miles of use in the crankcase, still exhibits outstanding deposit control.

Save Money
Reduced maintenance costs through better protection, fewer new parts to buy and extended drain intervals save 4x4 owners hundreds, sometimes thousands
of dollars every year.

Reduce wear
The primary function of oil is to prevent friction and wear. AMSOIL synthetic motor oils are made from the finest synthetic base stocks and most advanced
additive packages. The uniform molecular structure of AMSOIL synthetic motor oil ensures their durability and effectiveness. The additives protect engines by bonding to metal surfaces and forming a protective film layer between moving parts that are vulnerable to friction and wear when an engine is first started and before the oil begins to circulate completely. AMSOIL synthetic motor oils provide the ultimate in wear protection in high-stress and heavy load driving conditions.


Warning: include(/var/www/vhosts/oilhelp.com/httpdocs/includes/include_die.php) [function.include]: failed to open stream: No such file or directory in /home/oilhelp/public_html/includes/include_app_trucks.php on line 101

Warning: include() [function.include]: Failed opening '/var/www/vhosts/oilhelp.com/httpdocs/includes/include_die.php' for inclusion (include_path='.:/usr/lib/php:/usr/local/lib/php') in /home/oilhelp/public_html/includes/include_app_trucks.php on line 101

Warning: include(/var/www/vhosts/oilhelp.com/httpdocs/includes/include_ss.php) [function.include]: failed to open stream: No such file or directory in /home/oilhelp/public_html/includes/include_app_trucks.php on line 102

Warning: include() [function.include]: Failed opening '/var/www/vhosts/oilhelp.com/httpdocs/includes/include_ss.php' for inclusion (include_path='.:/usr/lib/php:/usr/local/lib/php') in /home/oilhelp/public_html/includes/include_app_trucks.php on line 102

Warning: include(/var/www/vhosts/oilhelp.com/httpdocs/includes/include_2000.php) [function.include]: failed to open stream: No such file or directory in /home/oilhelp/public_html/includes/include_app_trucks.php on line 103

Warning: include() [function.include]: Failed opening '/var/www/vhosts/oilhelp.com/httpdocs/includes/include_2000.php' for inclusion (include_path='.:/usr/lib/php:/usr/local/lib/php') in /home/oilhelp/public_html/includes/include_app_trucks.php on line 103

Warning: include(/var/www/vhosts/oilhelp.com/httpdocs/includes/include_hp.php) [function.include]: failed to open stream: No such file or directory in /home/oilhelp/public_html/includes/include_app_trucks.php on line 104

Warning: include() [function.include]: Failed opening '/var/www/vhosts/oilhelp.com/httpdocs/includes/include_hp.php' for inclusion (include_path='.:/usr/lib/php:/usr/local/lib/php') in /home/oilhelp/public_html/includes/include_app_trucks.php on line 104

Warning: include(/var/www/vhosts/oilhelp.com/httpdocs/includes/include_xl.php) [function.include]: failed to open stream: No such file or directory in /home/oilhelp/public_html/includes/include_app_trucks.php on line 105

Warning: include() [function.include]: Failed opening '/var/www/vhosts/oilhelp.com/httpdocs/includes/include_xl.php' for inclusion (include_path='.:/usr/lib/php:/usr/local/lib/php') in /home/oilhelp/public_html/includes/include_app_trucks.php on line 105

 

AMSOIL Oil and Air Filters

Ea Air Filters
AMSOIL Ea Air (EaA) Filters feature exclusive nanofiber technology that delivers more efficiency, higher capacity and optimum air flow. Nanofiber technology has been used exclusively in heavy duty applications, including the US ARMY Abrams
M1 tank. AMSOIL has brought this technology to the auto/light truck market. With AMSOIL Ea Air Filters, dust and sub micron particles remain on the surface
and are trapped in the nanofibers, preventing particles from lodging in the filter media depth. This produces higher efficiency and higher capacity which extends engine and filter life and reduces engine wear.

Ea Oil Filters
AMSOIL Ea Oil (EaO) Filters offer the highest efficiency rating in the industry. Their small synthetic nanofibers trap smaller particles and hold more contaminants, resulting in lower restriction. AMSOIL EaO Filters have a far greater capacity than competing filter lines. When used in conjunction with AMSOIL synthetic motor oils in normal service, EaO Filters are guaranteed to remain effective for 25,000 miles or one year, whichever comes first.

AMSOIL Ea By-Pass Filters
AMSOIL Ea By-Pass (EaBP) Filters provide higher filtering efficiency, soot removal and increased oil capacity due to new media composition and configuration. AMSOIL EaBP Filters have an efficiency of 98.7 percent at two microns. At normal operating RPMs the EaBP Filter will filter all of the oil in a typical five quart sump in less than 10 minutes. The superior construction of AMSOIL EaBP Filters provides better sealing and increased longevity along with superior corrosion resistance.

Dual Remote Filtration
The Dual Remote Filtration system provides maximum protection and maximum convenience. A single mount holds an AMSOIL Ea By-Pass Filter and an AMSOIL
Ea Oil Filter in one location. Place the mount anywhere near the engine for easy access.

Donaldson Filtration Products
AMSOIL offers filtration products for four-wheel drive vehicles from Donaldson®, a world leader in filtration.

Donaldson Endurance™ filters provide the highest level of filtration efficiency in the industry. Endurance filters are made with advanced synthetic and nanofiber technology that results in fibers that have a controlled size, down to sub micron diameters. It is this nanofiber technology that provides higher efficiency and greater capacity to better protect four wheel drive vehicles.

AMSOIL also carries premium air filters that utilize PowerCore filtration technology.The rugged structure of PowerCore filters features an innovative, layered, fluted filter media, which allows air to enter an open flute while forcing it out an adjacent flute, allowing only clean air into the engine. Dirty air is effectively filtered and cleaned in only one pass through the media. PowerCore
filters are available for Ford 6.0L Power Stroke™ Diesel and GM H2 Hummer 6.0L Vortec™ four-wheel drive vehicles. An air induction system for Ford 7.3L Power Stroke™Diesels featuring PowerCore technology is available as well.

  • Higher Efficiency
  • Greater Capacity
  • PowerCore Filtration Technology
  • By-Pass Filtration

 

 

AMSOIL Synthetic Gear Lubes

AMSOIL synthetic gear lubes deliver the rugged protection four-wheel drive differentials and manual transmissions need. Power and Fuel Economy Low-friction AMSOIL synthetic gear lubes maximize power output and minimize heat buildup. This means less energy spent on friction, and more used for maximum four-wheel drive power and top fuel economy. Load Protection AMSOIL synthetic gear lubes bear the brunt of high-load stress so gears don’t. AMSOIL synthetic gear lubes’ naturally high film strength and tough extreme-pressure agents shield components from premature wear.

All-Season Performance
AMSOIL synthetic gear lubes have a high viscosity index rating. That means they won’t become waxy in low temperatures and they’ll remain viscous
enough to protect engines in extreme heat.

Clean Running Stable even in extreme heat, AMSOIL synthetic gear lubes resist oxidation and thermal breakdown, helping gears stay free of sludge and other
deposits.

AMSOIL SEVERE GEAR® Synthetic Extreme Pressure Lubricants
AMSOIL Severe Gear Synthetic Extreme Pressure (EP) Lubricants (SVO, SVT & SVG) are premium grade lubricants specifically engineered for maximum performance in severe duty applications. Severe Gear features an exclusive blend of high viscosity, shear-stable synthetic base oils and an extra treatment of high-performance additives. AMSOIL Severe Gear Synthetic EP Lubricants maintain their viscosity for long-lasting protection against metal-to-metal contact. AMSOIL Severe Gear lubricants are designed to provide better performance and excellent protection during temperature extremes.

  • Superior film strength
  • Prevents thermal runaway
  • Rust and corrosion protection
  • Reduced operating temperatures
  • Improved efficiency
  • Longer oil, seal and equipment life


Warning: include(/var/www/vhosts/oilhelp.com/httpdocs/includes/include_svg.php) [function.include]: failed to open stream: No such file or directory in /home/oilhelp/public_html/includes/include_app_trucks.php on line 248

Warning: include() [function.include]: Failed opening '/var/www/vhosts/oilhelp.com/httpdocs/includes/include_svg.php' for inclusion (include_path='.:/usr/lib/php:/usr/local/lib/php') in /home/oilhelp/public_html/includes/include_app_trucks.php on line 248

 

AMSOIL Synthetic Automatic Transmission Fluid

AMSOIL Synthetic ATF delivers unmatched protection and performance for automatic transmissions and ATF-filled manual transmissions and transfer cases.

Power and Protection
AMSOIL Synthetic ATF works as a powerful friction reducer, saving fuel and maximizing performance. AMSOIL Synthetic ATF’s tough, durable lubricating film and anti-wear additives protect components from wear-promoting contact, even during high load operations.

All-Season Performance
AMSOIL Synthetic ATF not only performs under extreme hot and cold conditions, it inhibits excessive heat buildup, enhancing performance and prolonging component life.

AMSOIL ATF helps prevent component overheating and ensures cooler, smoother transmission operation.

Promotes Cleanliness
AMSOIL ATF is two times more oxidation resistant than conventional transmission fluids, even under the toughest heavy towing and high temperature conditions. It protects clutches, planetary gears, valves, pumps and seals from damaging sludge and varnish deposits.
AMSOIL ATF helps to keep components clean, ensuring long life and top performance.

Smooth Shift Performance
AMSOIL ATF provides smooth shifting and long, trouble-free transmission life. In addition, the antiwear additive package makes AMSOIL ATF an excellent lubricant in other hydraulic systems.

  • Resists Oxidation and Thermal Degradation
  • Provides All-Season Protection
  • Anti-Wear Protection
  • Extended Drain Intervals
  • Outstanding Performance in Transmissions, Power Steering and Hydraulic Applications
 

AMSOIL Synthetic Greases


Warning: include(/var/www/vhosts/oilhelp.com/httpdocs/includes/include_greases.php) [function.include]: failed to open stream: No such file or directory in /home/oilhelp/public_html/includes/include_app_trucks.php on line 309

Warning: include() [function.include]: Failed opening '/var/www/vhosts/oilhelp.com/httpdocs/includes/include_greases.php' for inclusion (include_path='.:/usr/lib/php:/usr/local/lib/php') in /home/oilhelp/public_html/includes/include_app_trucks.php on line 309
 

AMSOIL Fuel Additives


Warning: include(/var/www/vhosts/oilhelp.com/httpdocs/includes/include_additives.php) [function.include]: failed to open stream: No such file or directory in /home/oilhelp/public_html/includes/include_app_trucks.php on line 320

Warning: include() [function.include]: Failed opening '/var/www/vhosts/oilhelp.com/httpdocs/includes/include_additives.php' for inclusion (include_path='.:/usr/lib/php:/usr/local/lib/php') in /home/oilhelp/public_html/includes/include_app_trucks.php on line 320
 

Web Site Questions: webmaster@oilhelp.com

www.inthesuntech.com